RE: filling center diff on 4kcsq

["Glen Powell" <gpowell@acacianet.com>]

There should be two 17mm plugs in the side of the trans, one drain and one fill. There should also be a drain for the tailshaft/center-diff section, on the bottom surface, I think. Draining the rear section is the only way to get it ALL out. Filling the trans also fills the diff section - but slowly. Fill to jes overflowing via the upper trans plug, wait a bit ('bout 1 bier) and fill summore (the trans - not yer gut :). There should be no need to remove any plugs/caps on the top of either section. Heed the most excellent advice to locate and remove the fill plug BEFORE draining.....


-glen