Re: Imparts oil drain valve p/n confusion

[Porsray@aol.com]

Don't have Imparts no. but Audi sez plug is a 26mm X 1.5 thread, 
part no. 059 103 193.  I know it it bigger than 25 mm, since I buy
25mm ID copper washers to use as ealing washers, and I have to
grind them open with a Dremel Moto-Tool.

By the way, official sealing washer is N 043 854 1, and is 26 mm ID X
31 mm OD X 2 mm thick.

Ray Calvo (porsray@aol.com)
1990 Coupe Quattro 



In a message dated 96-08-19 13:18:26 EDT, you write:

<< From: schulz@tif623.ED.RAY.COM (Peter Schulz)
 Date: Mon, 19 Aug 1996 10:04:28 +0500
 Subject: Imparts oil drain valve p/n confusion
 
 Hi Listers:
 
 I ordered the snazzy oil drain valve from Imparts.  The one
 that they sent me, p/n f106, is too small  (diameter).  It looks
 to me the size of the standard VW oil pan plug (about 1/2 inch).  
 
 Does anyone have the real part number?  Imparts said that the
 F106 was the correct number, however the package said ;
 "for all audi except Super 90 and V8".
 
 The drain plug for my car is about 25.4 mm (1 Inch) in diameter.
 
 Thanks!
 
 Peter Schulz
 1990 Coupe Quattro  ( 20V)
 schulz@ed.ray.com
  >>