FW: THERMO TIME SWITCH

[dougev <dougev@newpig3.newpig.com>]

>Quattro experts,

>	For the last month I have been trying to get the TT switch to work in
>my 85  4KQ.
>To complicate things the instructions given from Bentley have the TT
>switch located on the radiator hose flange going into the front of the
>engine...I was tipped of that the TT switch is on the rear of the head
>in-between the engine and the firewall....and it sure looks like the
>correct sensor based on the number of wires (3) and the colors going to
>it.    My problem now is that I am not getting any voltage to the  TT
>switch or the cold start valve when I crank the motor over.  (I think
>the same hot wire goes to both parts...with the ground connection from
>the cold start valve coming over to the TT switch  as the second
>connection on the TT switch)   
>	Can anyone give me some suggestion as to where I should look next?  
>	Can I just set up a hot wire to the two units and control it from
>inside the car with an on off switch?
>	Any and all help would be greatly appreciated.  Thanks in advance!
>	Please answer directly to my email address below.
>Doug Evans
>dougev@newpig.com
>85   4000S QUATTRO
>88   90 QUATTRO
>84   325e
>

application/ms-tnef