[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Crank Bolt socket = 27MM



> THAT PART IS A 27MM SOCKET, SEARS AVAILABLE, Do not use the 1 1/16, the
> torque you put on that bolt is VERY high, like in the 300ft/lb range, not
> good for fudging sizes.....   It's close in a 1 1/16, but hardly where you

Betcha you couldn't tell the difference without looking at what was
stamped on the side.  1.0625 vs 1.0630".  Less than 1 1/1000t of an inch.

I wouldn't worry about it myself... don't remember what I used, I'd
have to look in the toolbox ;-).

Orin.