Re: Audi Toolbox II

[QSHIPQ@aol.com]

In a message dated 97-02-17 10:49:59 EST, you write:

<< > *  Dremel tool (exhaust work) - cutoff wheels
  Is that what I call an "angle grinder"?
>>>>  The Dremel (Skil Tools - Skokie IL) tool is a small die grinder (hobby
type)...  I rarely find use or room for my industrial or angle grinders....
 The Dremel can get in really tight places, and is the only thing you can
manipulate to cutoff the frozen downpipe to WG bolts....  Every time I've
pulled a downpipe, I need to cutoff at least one of those guys...  High salt
area cars need this to get the upper oil feed line bolts to turbo off as well
 
 > *  10mm triple square (driveshafts)
 > *  Triple square for head bolts?
>>>>>>
 12mm triple square for head bolts - Might Bench that one

 > *  6mm hex wrench with cutoff  shortened arm (clutch master)
 Don't remember using one when I switched mine out.  LHD only?
  >>
Don't think that is a LHD only, Phil.  The problem (and this may be a 5k/200
thing) is that the upper hex bolt on the MC is almost impossible to get off
with a standard length 6mm hex, you hit the firewall...  I cut them about 1/2
length, it works like a charm...

HTH

Scott