Re: Wheel rattle/Indicator Stalk R/R

[Allan Jones <ampj@tiac.net>]

Bruce G Plante wrote:
> I have a 87 5kSQ with 150k.  I am back with several problems I need advise on.
> 
> 1)Combination switch(turn signal) will not go out of high beam.  Recommended
> vendor quoted $150 for new. Curious if there are any out there for cheaper,
> any other suggestions (currently using rubber band attached to the light
> switch), and if this a job for a do it your selfer.

    I'm presently staring at the indicator stalk and have no idea how to
remove it w/o breaking the SOB. Know you let me know it's $150! I was
going to try force, but not for $150! Somebody, please help. I removed 3
screws out of the metal contact plate after the steering wheel came off
and do not know what to do next. Like I stated in previous post, the
switch circles around the steering wheel spindle and I can get the
plastic circle to move 15-20 degrees away from the plane perpendicular
to the steering shaft, but nothing else. Is it conected to a set of
wires that don't want to let go or is there a screw(s)?
				THANKS TO ALL IN ADVANCE,
							   Allan