Air temp sender

[Neil Swanson <75377.3445@compuserve.com>]

BTDT,

Check the air temp sender first.  Why?  'Cause it is easy! Mine had the light
flashing at me too.  Sensor checked OK though.  I found it was wet in there.
The two wires going to the sensor aren't totally insulated.  The boot would
collect water from rain or whatever and give a bazillion ohms reisitance when
boost/charge air temps went up.  Uninsulated wires are the problem.

So either fix the boot and or insulate the exposed wire.  I used Eastwoods
liquid electrical tape and painted on the insulation.  All sealed up and no
problem or codes.

This should be in the Archives

Neil
'885ktqkonihellafuchdirtdustcrumbschildseatetc