Re: Help with window switches

[KSMITH1@mailgw.sanders.lockheed.com]

Tony Lum <tlum@flash.net> said in part:

     Hi Bruce,
     
     If the outer casing doesn't have any openings, then you must pry 
     off the rocker part of the switch.  Then using a small 
     screwdriver, knock the locking tabs (2) back thru the housing to 
     expose the contacts for cleanup.

The 88 90q switches use 4 internal tabs.  After removing the rocker 
part of the switch, use a small tool to pry the plastic housing away 
from the internal tabs at the sides of the contact end of the switch, 
and insert shim stock until all 4 are free from the sides.  Then push 
out the switch guts.  The archives have a more complete description.

***                 ...Kirby    (Kirby A. Smith)                 ***
***                      2 X 1988 90q                            ***
***              ksmith1@mailgw.sanders.lockheed.com             ***
***              [=]   kirby.a.smith@lmco.com                    ***
***  Opinions expressed herein are entirely those of the author. ***