headlight help

[quk@sievers.com (Phil Payne)]

In message <970730110031_-2077809798@emout15.mail.aol.com> Polidori1@aol.com writes:

> Hooked up the high (inner) beam on the twin bulb euro Ur-Q lights in the
> following manner, and found the following problem.
> 
> The main (H4, outer bulb) connector has three wires; yellow, white and brown.
>  Determined that white was the high beam, so I spliced it and the brown
> (gnd?) wire and hooked up the other ends to the inner, high beam bulb.
>  Worked fine . . . for about 5 minutes . . . then no high beams at all, H4 or
> otherwise.  Fuses look good, and there are relays in place.
> 
> What is the likely culprit?

A burnt out wiring harness.  

-- 
 Phil Payne
 Committee Member, UK Audi [ur-]quattro Owners Club