4k clutch problem...

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <199708160508.WAA28838@oly.silverlink.net> Bernie Strub writes:

> Oh, yeah, on adjusting the pedal...there is a two-ended threaded rod that
> connects the pedal to the linkage that actuates the hydraulic cylinder.
> Loosen the locknuts, and adjust the length of the rod until the "hangup"
> goes away.  I noticed a slightly raised engagement point, but nothing to
> disturb my non-enthusiast wife...  Don't forget to re-tighten the locknuts,
> or you will re-live this procedure...

The thing to adjust for is driving the piston _ALL_ the way down the cylinder.  
If the piston doesn't reach the end of the cylinder, the clutch can't be bleed.

(You can got through the motions - but it won't work.) 

-- 
 Phil Payne
 Committee Member, UK Audi [ur-]quattro Owners Club