Fuel Injctor Replacement - 5KCSTQ

[russ southerlin <russell.s.southerlin@ast.lmco.com>]

Mark,
I have found what works well fo me is to pop each injector out about 3/4
inch. and then get on them with a 12 and 14mm (I think its 12 and 14mm)
and remove the line before pulling the injector out. I re-install in
reverse - first put the injector in  and then connect the lines. 

I have pulled them all the way out with the lines attached but you are
right, you have to bend the lines in weird positions to clear obstacles.

What kind of new/used injector did you get for $15. Last one I replaced
was about $35 plus shipping.

Russ
87 5KTQ