Fuel Press. Problem Solved!!

[russ southerlin <russell.s.southerlin@ast.lmco.com>]

I made yet another trip to the junkyard and convinced them to give me
the OXS Freq. Valve assy. off the car I removed the fuel dist. from.
Upon replacing the OXS F/V assy. the car started right up and held 72psi
fuel system press. There is a little hesitation and I need to setup the
CO/duty cycle but hopefully this will cure my problems. I am going to
post some of my findings on the subject of hard starting/no starting in
the near future.

Russ
87 5KTQ