Re: Vacuum filter location

[Wolff <wolff_b@ix.netcom.com>]

snip

> Watch the direction too. You want to connect the mfld side to the spout that
> goes to the bottom of the fuel filter (usually the central one) as to let the
> oil precipitate on the bottom. The pick up spout should be the one from the top
> of fuel filter. It should be connected to the A/C programmer.
> 
> --
> Igor Kessel
> '89 200TQ - 18psi (TAP)
> '98 A4TQ - on order...again. For the third time and counting.
> Philadelphia, PA
> USA

Now how does this work on a turbo engine? Is there a one way valve and
an vacuum accumulator in the A/C programmer that gets evacuated only
during less than 1 bar manifold periods? In otherwords, doesn't the A/C
programmer need vacuum to pull the actuators?
TIA,
Wolff