Re: A/C programmer motor

[cobram@Channel1.Com (Cobram)]

 -=> Quoting Brendan <=-



 Br> What position, for example, is the arm in when the system is turned to
 Br> the "Off" position?  Parallel to the box, facing towards the driver's
 Br> side? Perpendicular to the box?  Some angle inbetween?  This is what I
 Br> need. 

      Having recently re-soldered the solenoid connections
      on the '84 5KS, it would SEEM to be easy to realign
      the arm, since the motor is so easily removed/installed.

      Put the box back in the car, get the car up to operating
      temperature, set the cabin temp on the head unit to max
      and see where the motor stops. Manually push/pull the cable
      until you get heat coming out, put the cable on it's
      programmer clip, and the end of the cable should be
      exactly where you want the end of the arm.

      This should work, if Audi follows any kind of logic, but
      then again, I wouldn't bet the farm on it, never having
      BTDT.

      BCNU

... We now return to our regularly scheduled flame-throwing.
___ Blue Wave/386 v2.30