tools for 4ks fuel sys work

[roger@mostro.sps.mot.com (Roger Albert)]

Hi all,

Ok, so, I'm getting ready to really dig into my 86 4ks' fuel sys problems,
which I've previously babbled about on this list.  In the spirit of hating
to get into a job and have things all torn down only to find out I don't
have the correct tools, what's a good basic list of tools to work on this
sys.   I have a very wide range of metric hand tools from all my motorcycle
work, but nothing like pressure gauges for the fuel system and whatever 
adaptors I might need.  I saw an apparently very universal FI kit from
J.C.W. but, it was $299.  A bit high, unless really needed, for working on
a single car.  I also don't have a timing light anymore, though I'm about
to fix that.  Otherwise, I'm very well set up electrically.  Several VOMs,
a func generator or two, and an O-scope.  I guess I'm mostly worried about
measuring fuel pressure.  I do have a vac-gauge and compression tester some
where around here.   

I'd love to hear you guy's recommendations as to what tools and adaptors/
fittings I should have on hand before I plow into this.

regards
roger

===================================================
Roger Albert (go Illini!)  Motorola.  Austin, Texas 
roger@mostro.sps.mot.com   Wireless/DSP Div.  56xxx
Red 94 Ducati M900 Monster  and  White 65 BMW R60/2 
Blue 1976 BMW R90/6 and  1974 R90/6 Sidecar project
1973 Moto Guzzi Eldorado, restoration now underway!
1986 Audi 4000S -- Yup, sometimes you need 4 wheels
---------------------------------------------------
Opinions expressed are always mine --, never Moto's
===================================================