Re: tools for 4ks fuel sys work

[turbo@steelcity.net (Mike Goliwas)]

> I'd love to hear you guy's recommendations as to what tools and adaptors/
> fittings I should have on hand before I plow into this.
> 
> regards
> roger
	All you need is a gauge and a hose capeable of 100psi.
I went to the local Audi salvage yard and found a fitting and a hose for
a couple of dollars.But on the CIS-E fuel system if you want to check it
like the factory wants you to you will need a "T"connection and a valve
with a gauge attached to one line.I purchased a fuel press gauge like
this from MAC tools for less than $150.
turbo
turbo@steelcity.net