Re: 4kq 4000rpm cutout

[Gerard <gerard@poboxes.com>]

> I had a similar problem with a 4ks which turned out to be a small filter
> INSIDE the bolt that holds the fuel line to the FI metering head.  This
> is supposed to be removed by the dealer after 1k miles or so and is
> intended to catch material left over from the manufacturing process.
> Mine had not been removed after 8 years and was very dirty.  I removed
> it and the problem was gone.  Unfortunately this was after replacing all
> four injectors at $60 ea., both fuel filters and temp. sending unit.

This filter, is it also on the 200T models? How does one check for
it?

G.
-- 
"a thousand miles from here, there is another person smiling"
1990 Turbo (200T)
name   : gerard van vught
tel    : +27-57-912 2658 (w) / 082 923 9609 (cell)
url    : http://www.acenet.co.za/homepages/gerard/
e-mail : gerard@poboxes.com  / han.solo@galaxycorp.com
         gerard@acenet.co.za / van_vught@frg.issi.co.za