Re: E-brake replacement/200q

[steveb@falcon.kla-tencor.com (Steven Buchholz)]

I have never done the 200q, but I found the project to be quite simple 
on the urQ.  The cable is held in place using a couple plastic ferrules, 
and the ends hook onto the caliper and the handbrake mechanism.  Perhaps 
the toughest thing will be accessing the handbrake mechanism, which is 
located above the propeller shaft.

I THINK the 200 might actually turn out to be easier then the urQ as the 
200 has two separate cables ... the urQ has one cable that starts at one 
caliper and ends at the other, with the handbrake mechanism in the middle.  
One think that might come in handy is loosening up the handbrake mechanism 
from inside the passenger compartment ...

HTH!

Steve Buchholz
San Jose, CA (USA)