[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Split cv boots
Frank
I agree, must have done over 20, always had to use the BFH...
Avi
-----Original Message-----
From: frankbauer@thevine.net <frankbauer@thevine.net>
To: quattro@coimbra.ans.net <quattro@coimbra.ans.net>
Date: Friday, February 20, 1998 12:33 AM
Subject: RE: Split cv boots
>steve sez:
>> but all
>>that is needed to seaparate the CV from the shaft is a rap or two with a
>>mallet ...
>
>i always thought this was a myth. every boot i have replaced (4kq, cgt,
>tqw, scirocco, gli, etc) required that i pound the crap out of the joint
>before it will separate.
>
>frank
>
>to: IN:Steven.Buchholz@kla-tencor.com
>cc: IN:quattro@coimbra.ans.net
>
>