Re: Error 2142 from ECU...

[Sachelle Babbar <sbabbar@iris.nyit.edu>]

The thing to do if you want to ceack the wirirng for continuity is
identify which sensor's circuit is at fault. Next, with a multimeter set
for continuity, you get the wires for te sensor, at the sensor. You locate
on the ecu plug what terminals they are. Connect on side of the multimeter
to the sensor's wire and the other end at the corresponding terminal at
the ecu plug. If the wire isn't broken, you'll get a number or a beep or
something. I do recommend CAREFULLY pulling the ecu plug off of the ecu to
prevent any possible damage (not likely, but be safe). You'll find the
term. designation in a Bentley or something else. My local Audi dealer is
nice enough to photocopy things for me like that whenever I need them.
Good luck.

**************************************************************************************************************************************************							       
*Steve                                       Sachelle Babbar
*'84  5ksT 1.6-2.0 bar                    <SBABBAR@IRIS.NYIT.EDU>
*Cockpit adjustable wastegate, AudiSport badge
*
*Disclaimer:"Any information contained herein is based purely on my own
*personal experience and may not necessarily reflect yours. Use caution as
*your results may vary from mine."
********************************************************************************