Re: Stripped drain plug removal

[four.rings@MCIONE.com]

"Michael Stocker" <mdstockr@neo.lrun.com> wrote: 

Is it hard to position the valve so that it is orientated properly?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Almost impossible. You need to shim it properly. I am still working on
mine, need to find either a 0.5mm or 1.5mm gasket (the tread pitch is
1mm).

Having said that, I'd second Andrew's opinion: this valve is indeed
rather convenient.

-- 
Igor Kessel
'89 200TQ -- 18psi (TAP)
'98 A4TQ -- nothing to declare
Philadelphia, PA
USA