Re: Fuel gauge problems

[Tom Nas <tnas@euronet.nl>]

"Renier Meyer" <RMeyer.rdi@reutech.co.za> wrote:

>Replaced the fuel pump very carefully myself (4 times) only to have
>the fuel guage stick at 3/4 or 1/3 and did not want to move below on
>the one and above on the other.

>The trick to this job is: The fuel pump fits only in one orientation,
>which allows free movement of the float guage sender unit. On the
>200T range you have to line the pump outer up with a mark on the
>plastic screwed to the chassis (or on the tank itself).
>(Trunk mounted tank, mark towards the
>car's interior on the right hand side).

I expect this trick not to work for the 90- does anyone know how to get my
90's new fuel gauge to read over 3/4?

TIA

Tom

 _______________________________________________________________________
 Tom Nas                                          Zeist, The Netherlands
 tnas@euronet.nl
 1988 Audi 80 1.8S, mostly Tizianrot metallic, 219,000km
 1987 Audi 90q 2.3E, Tizianrot metallic, 163,000km

    "We don't like their sound, and guitar music is on the way out."
                --Decca Recording Co. rejecting the Beatles, 1962.