archive searching

["Ken Keith" <Ken.Keith@SpecialDevices.com>]

OK, I'm a little bit bugged that I can never seem to get the search engine 
to work.  Here's an example of what I tried:

I painstakingly found the original post regarding removing control arms, 
here it is.

<<From: Michael Williams <daserde@ucla.edu>
Subject: Rear control arm and front fender help please
Date: Fri, 22 May 98 10:53:02 -0700

Next Article (by Subject): Re: Rear control arm and front fender help please Huw Powell
Previous Article (by Subject): RE: Rear axle nut on 4kq quattro
Next in Thread: Re: Rear control arm and front fender help please Huw Powell
Articles sorted by: [Date] [Author] [Subject] 

Hey all.  First of all, does anyone on here have a drivers front fender 
for sale from an 85-87 4000 body, coupe, quattro., any of those will work.

And also, is there anything but an offset wrench that i can use to hold 
the nut inside of the subframe on the control arm.  It seems that sears 
doesnt sell any big enough, i think the nut is 17mm right?  And i cant 
get a socket to fit in there.  So please lemme have some help on that.>>

Then I do a search on "control arm", all words.  I get three pages of 
responses, but this post is not included, nor are the responses.

AAMOF, if I do a search on "And also, is there anything but an offset 
wrench that i can use to hold the nut inside of the subframe on the 
control arm.", I get "no matches found".

What gives?  Does the search engine work?  Dan?

Thanks,

Ken