Window problem-not cable or motor

[Myke456@aol.com]

As I arrived home today, found that I couldn't raise the dr window. Assumed it
to be "cable time" again. Pulled panel, found the cable OK, able to raise
window by shoving it while operating switch. Lowers fine, motor will run when
trying to raise it, but window stays where it was left. Can't push it up
unless I hit the down switch, window goes all the way down, then hold the up
switch, and then shove up window, but must I "keep up" with the motor.

I removed the regulator assy. opened the reg, cleaned/lubed the gears,
cleaned/lubed the slider track. I found a small screw (maybe 1/2 screw with
head) stuck to the metal piece that rides the vertical metal channel - thought
maybe this was causing a bind. Very surprised that it didn't work after
reassembly.

Anyone been here?

  ([____]=====OOOO=====[____])   87 5kcsTQ, 223k miles
 []]]]]]]][Mike Aiello][[[[[[[]     original owner
___\}}}/________________\}}}/_______myke456@aol.com
       Dutchess County, NY