Re: hood release

["scott miller" <macatawa@hotmail.com>]

>Once open, repair is simple    just install a u
>bolt at the end of the cable in place of the plastic tip.

The unlatch lever is a rod with a loop bent in the end, you can see it 
through the top of the grill on the passenger side.  My 200 has a small 
screw clamp repair on the actuating wire, but the wire slipped out of 
the small gap in the loop last week.  Had to unlatch with a very long, 
skinny screwdriver through the grill, then smashed the loop tighter.

-Scott

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com