Re: my new ur-q - needs help of course.

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <Pine.GSO.3.95.981025185915.23041B-100000@outside.organic.com> c a l i b a n writes:

>  the first problem i noticed came when i really punched
>  it, this was sometime saturday (i did the pickup friday,
>  in denver, and drove it back to sf thru salt lake city.
>  when i run it up into 5k rpm and then shift quick and
>  drop the clutch out, the whole thing jerks and shakes
>  violently.  a second or so, clutch in, decellerating,
>  and i can let slip the clutch and all is well.  a few
>  weeks reading this list makes me think it's some kind
>  of emission control dohickey?  even if it isn't, i think
>  the bigger problems might be related... read on...

I'd check the inlet manifold grounds first of all - both where they
attach to the manifold and just inside the harness.  Then perhaps
the coil ground.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)