RE: 4kq Euro light question

["Ken Keith" <ken.keith@impulsedata.net>]

Which eurolites are we talking about here?  H4's, or the H1/H4's?

Where is this parking light?  Are we talking "city lights", that have a 
metal ring that is held in place by the H4 bulb?  Or is this a separate 
little 5w or something bulb in the headlight assembly?

Thanks,

Ken

Todd Phenneger <phen9461@uidaho.edu> wrote:
> 
> mark,
>     That should be the connector for your parking lights.  An added
> feature of the Euro Lights.  Is there a bulb in there.  IF so, wire it
> into parking circuit.  Then make sure to relay parking circuit so you
> dont fry light switch since it is taxed anyhow.    OR, if you dont want
> people always saying your lights are on when you leave them on to run to
> the bank teller, leave them dissconected but I think they are cool. Some
> lights have it only on Driver side, some on both sides.  Not sure about
> the H4 4kq lights.
>     BTW, you can get sockets for the H4's at Napa and Shucks.  When you
> ask for sockets for H4s you may get Blank stares but if you ask for
> simple 3-prong connectors for old Sealed Beam units they will understand.
>  Wire is only like 16ga on these though so you could always just run 10ga
> straight to the plug terminals.  L8R
> 
>     Todd
> 
> - ------------------------------
> I see the light plug with its three spade connectors of the huge and hard
> to find variety.  Resistance measurements should tell me how to hook it
> up.  BUT, what is that plug off on the side of the rear housing?  It has
> 
> two male spade connectors (quick-connects for everyone else) in a black
> plastic connector.