[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 5KCS Door Panel Removal



<<It seems like the panel should just now side up and off, but it still
seems to be held in at the center, around the pull handle...  >>

	Depends on what you are refering to as "pull handle".  If you are refering to
the lever that opens the door, there is a screw in the facia under it.  That
screw is hidden by a small U-shaped piece of plastic.  It's a phillips, unless
it's been replaced.
	If you mean the leather covered door pull that you grip to close the door,
there are three phillips head screws holding it in place.  You have to remove
the center piece from the door pull.  This can be done with a small flat screw
driver to lift it initially.  (It's help in place by plastic pins.)  Watch
this carefully, I've seen a couple door that appeared to have been "waxed" and
the remains had crusted over in the seam, thus making it VERY difficult to get
the center peice out.

	HTH.
	--ml