[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: V8Q/200Q/ETC: Dual Antenna Cabling



In a message dated 12/29/98 5:13:03 AM !!!First Boot!!!, Steven.Buchholz@kla-
tencor.com writes:

<< <snip> I'm thinking that there is likely to be a connector somewhere in the
cable to
 allow the CD player to be attached ... and this connector is disconnected.
 Has anyone BTDT?  Is there a connector in the line somewhere?  If so, where
 is it?  I'd hate to have to take the console apart and then find it is
 somewhere behind the rear seat or something.  Many TIA! >>

Steve,
FWIW, I recently had a CD installed in my '90v8. My understanding is that in
the 1990 model there was no dedicated connector for the CD - even the Audi
unit was an RF type unit that played thrpough the radio as does the
aftermarket types. If you're considering a an RF CD changer make sure that
both antenna wires - front & rear are intercepted by the CD's RF module.
HTH
Bernie Dubin
'90 v8q
'93 miata b