[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Water pump wear mystery ... solved
In message <a4a75588.369c0b38@aol.com> JustaxPHX@aol.com writes:
>> Probably because the teeth are the wrong size. You have all the classic
>> symptoms of a number-of-teeth mismatch. All the belts are the same
>> length - the ones with fewer teeth obviously have _LARGER_ teeth, and
>> these ride up on the waterpump pulley.
> Sorry, Phil, but you're wrong ... the original size and spacing of the teeth
> on the water pump sprocket can be seen by looking at the unworn edge of the
> sprocket and it clearly matches the timing belt.
Equally sorry, but the only person on this planet whom I would trust to
tell the difference between a 113-tooth water pump and a 120-tooth water
pump by visual inspection is Claire Marsden - Adam Marsden's wife at AM
Cars.
You're telling me you can spot a 6% difference in tooth size?
--
Phil Payne
Phone: 0385 302803 Fax: 01536 723021
(The contents of this post will _NOT_ appear in the UK Newsletter.)