Best way to flush mineral oil

[Gurdev Sethi <gsethi@ziplink.net>]

As part of getting my car in shape I would like to replace the power
steering oil. I have read Scottmo site (which is great) and found the
procedure for flushing the brake/hydraulic fluid using a old cap to apply
5-10 psi to drain the hyd fluid. I have created a modified cap for the hyd
fluid. Would this work well for the power steering fluid? I plan on
cleaning the banjo bolts on the pump but bentley says to replace these
only (is cleaning and reusing ok?)
	So if anyone has  a great procedure for flushing power steering
fluid I would love to know it. Bently only talks about bleeding the
system. I plan on doing it this weekend and will reply w/ a post mortem on
monday.

Thanks
Gurdev