Re: Wierd 4kq CIS Fuel Problem

[ti@amb.org (Ti Kan)]

Todd Phenneger writes:
> 	Thanks for the help. One problem, how do you jumper the relay.  I
> ant figure out whih pins to jumper. I assume you remove the relay.  Then
> there are like 5 pins on it.  Do I jumper the 15-? or the 30-? or
> something else.

Pull off the fuel pump relay, and then put a jumper wire (preferably fused)
between the terminals marked 48/30 and 52/87.  You should hear the fuel pump
run when you do this.

-Ti
96 A4 2.8 quattro
84 5000S 2.1 turbo
80 4000 2.0
-- 
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti@amb.org
 //////  http://metalab.unc.edu/tkan/
///