Re: Wierd 4kq CIS Fuel Problem

[Robert Myers <rmyers@inetone.net>]

NoNoNo, Ti.  The jumper goes between the connectors of the *socket* into
which these pins plug, not on the relay itself.  

At 01:20 PM 2/7/99 -0800, Ti Kan wrote:
>Todd Phenneger writes:
>> 	Thanks for the help. One problem, how do you jumper the relay.  I
>> ant figure out whih pins to jumper. I assume you remove the relay.  Then
>> there are like 5 pins on it.  Do I jumper the 15-? or the 30-? or
>> something else.
>
>Pull off the fuel pump relay, and then put a jumper wire (preferably fused)
>between the terminals marked 48/30 and 52/87.  You should hear the fuel pump
>run when you do this.
>
>-Ti
>96 A4 2.8 quattro
>84 5000S 2.1 turbo
>80 4000 2.0
>-- 
>    ///  Ti Kan                Vorsprung durch Technik
>   ///   AMB Research Laboratories, Sunnyvale, CA. USA
>  ///    ti@amb.org
> //////  http://metalab.unc.edu/tkan/
>///
>
>
>
___
   Bob
  *******************************************************************
  *  Robert L. Myers  rmyers@inetone.net    Home 304-574-2372/1166  *
  *  Rt. 4, Box 57,  Fayetteville, WV 25840 USA      WV tag Q SHIP  *
  *  '95 S6  Cashmere Grey - der Wunderwagen                        *
  *  http://www.cob-net.org/church/pvcob.htm                        *
  *******************************************************************