[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Radiator Repair 88 80q

Thank You to all who responded. I used a piece of 1" od 316l Stainless Steel
and some JB Weld to fix the neck.

Afterward  I had it pressure tested, and it held fine, howevr there was no
flow through the radiator. This is why it blew apart in the first place.

There are places locally that I could take te radiator out and have it cleaned
for about $75.

I figured that if I were going to have it out of the car, I might as well
replace it. Especially if I'm going to have this car for a while, and I
am.....

So for all who are interested, I will be purchasing and replacing the radiator
this week and will report back then.

Scott Calabrese
http://members.aol.com/river6822
88 80q