Re:pilot bearing removal

[MHLIGGINS@aol.com]

<<Everything seems pretty straight forward, except for the life of me, I don't
know how to remove the pilot bearing from the crankshaft without the special
tool noted in the Bentley.  >>

	We've successfully used the hydraulic method twice.  You need a clutch
aligning tool or facsimile thereof.  Fill the cavity with grease, up to about
half the width of the pilot bearing. Insert the clutch alignment tool and use
a rubber hammer to force the pilot bearing out. Yep, it's messy. But still
lots easier and cheaper than the special tool.

	Later.
	--ml