02 sockets

[apowell@ezlink.com]

Hizzone Orin said:

Those O2 sensor sockets with a slot in the side tend to flex a lot...
at least mine does.  I'm beginning to think they are only suitable
for installation.

Since some O2 sensors practically weld themselves in, for removal,
cutting the wires and a deep socket may be a better idea,
or cutting the top of the sensor off as you suggest if you don't
have a socket deep enough.

Orin, I absolutely agree.  I've broken two Lisle 02 sockets ih half 
(different times)  trying to get old 02 sensors out.  Fortunately, 
they're lifetime guaranteed so I got replacements easily.  After that, 
I soak them with Kroil for 24 hours and then use a six-point 1/2" 
drive socket to take them out.  The only practical use of the 02 
socket with the slotted side is, (IMO) installation.

++++++++++++++++++++WSU-CSU+++++++++++++++++
Al Powell
Apowell@EZlink.com
1958 Fiat 1200 Spyder "Transformabile"
1983 Datsun 280ZXT
1990 Audi 200
http://www.ezlink.com/~powells/
++++++++++++++++++++++++++++++++++++++++++++++