Re: Ur-Q hydraulic head conversion questions...

[Frederick Smith <smitty@pcrealm.net>]

Jeff,
 "Be careful, Will Robinson". The head gasket for the wx & kh is the
same for years 78-85. The MC gasket is different. The holes don't line
up "exactly". The mc bore is 1.5mm larger so the head gasket must be
different. The I-5 gasket for the MC,4000q,'91 200 and others is the
same part #. I seem to remember some "offset" to the holes/passages.
YMMV. Just a "heads up". You may have thought of this already.

Smitty