[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Solder vs. Crimp



In message <3736586E.C8F18DD7@together.net> John Cunningham writes:

> Anyone have contrary opinions to the latest Quarterly article asserting
> 'technical inferiority of a soldered joint' over a crimped one?
> Specifically the idea that when crimping 'wires are fused together'
> while soldering 'wires are stuck together'?
>
> IMHO, that describes some serious crimping tool and a lousy solder
> joint...

The only soldered joint on an ur-quattro is the one to the inlet air
temperature sender.  It's also a very common point of failure.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)