Re: wheel bearings on a 4kq

["----> Bob" <mx@snet.net>]

Thomas Barbera wrote:
> 
>         The strut housings will have to be removed to replace the wheel bearings.
>  I would recommend taking the housings off and taking them to a shop to be
> pressed out.  They can also press the new bearings in.  When I replaced the
> bearings on my 4kq,

There is a tool that will remove/install the new bearing in the car. It
makes a sucky job REAL easy.  Id ask if you could borrow or rent the
tool before going through all that!

Bob