Re: Replaced windshield, fitting issue...

[JordanVw@aol.com]

In a message dated 8/5/99 3:12:23 PM Eastern Daylight Time, 
gerard@poboxes.com writes:

<< My question: is it possible to have a windshield removed and refitted
 to follow the proper original line? Should I take the car back and
 throw a fit? I think this is another one of those typical Cape Town
 quality workmanship jobs!
  >>

be advised, the more you remove and reinstall a windshield, the greater the 
chance of rust resulting from paint damage from the cutting blade during each 
removal.  if you are going to have it removed again - insist that the entire 
area under the seal be cleaned free of "schmutz" (old eurathane/sealant) and 
re-painted with a premium quality rust inhibitive paint.

chris
'86 5kT
'86 5kTQ (with new windshield)