Re: More projects/seat heater

[David Ritter <dritter@mich.com>]

JMeckem@aol.com writes:

 > once I saw several wires and more than one heating element I realized it 
 > would be unlikely that all the elements are bad.

Not necessarily true, and it still only takes one thing to take down
the whole seats heat. Usually, it is one of the wires in the seat
bottom heater. I put a new one in my 89 200Q, and the seat was working 
again. I seem to remember trouble shooting the continuity with an ohm
meter and looking at the bentley wiring diagram. I found a bad wire in 
the seat bottom element and replaced it with a new one.
A little electrical troubleshooting is required on this one.

David