Re: Rear Diff Oil Seal Replacement Questions

["Erskine" <erskine@brevard.net>]

got mine at sears
----- Original Message ----- 
From: Levis-Fithian, Jeff E <LevisJE@LOUISVILLE.STORTEK.COM>
To: 'Todd Young' <tyoung@wamnet.com>; 'Quattro-List' <quattro@audifans.com>
Sent: Friday, September 10, 1999 11:48 AM
Subject: RE: Rear Diff Oil Seal Replacement Questions


> It sure would be fun to strip those bolts.  I know we had this thread a
> while ago, but where could one purchase an infamous "triple square" bit?
> -Jeff
> Oozing 95 A6Q
> 
> -----Original Message-----
> From: Todd Young [mailto:tyoung@wamnet.com]
> Sent: Friday, September 10, 1999 6:33 AM
> To: Levis-Fithian, Jeff E
> Subject: Re: Rear Diff Oil Seal Replacement Questions
> 
> "Levis-Fithian, Jeff E" wrote:
> 
> > 2.      The 6 bolts that hold the drive axle to the
> flanged shaft look like
> > torx bolts.  ETKA says they are BM10x48x26 size w/ polygon
> head.  What size
> > torx socket do I need to get for these?
> 
> I don't think they are Torx, I'm willing to bet they are
> "triple square". Use a
> Torx bit and you will probably round them out.
> 
> --
> -----------------------------------------------------------
> Quote for the day:
> Of course I don't look busy, I did it right the first time.
> -----------------------------------------------------------
> Todd Young              WAM!NET Inc.
> tyoung@wamnet.com       655 Lone Oak Drive, Bldg#A
> 651-256-5051            Eagan, MN 55121
> 800-585-1133 ext.5051   http://www.wamnet.com/
> '93 Audi 90S(|___\====OOOO====/___|)
>