[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 1990 Coupe A-arm bolts



I use an "Offset" 17mm/19mm wrench.  I got my Craftsman version from Sears
in the US, but SnapOn makes a nicer version.  The SnapOn number is XOM1719.

HTH,
-S

Stott Hare
85 Callaway 4ktq
89 100q
82 Scirocco

-----Original Message-----
From: M D Oxer [mailto:mdoxer@globalnet.co.uk]
Sent: Tuesday, October 12, 1999 2:12 PM
To: quattro@audifans.com
Subject: 1990 Coupe A-arm bolts


Dear Listers,

I am currently attempting to replace the suspension bushes on my 1990 Audi
Coupe 2.3E, and I have run into problems at a very early stage! The nuts on
the end of the A-arm bolts are tucked inside the suspension arm itself,
with very little access. None of my sockets or spanners seem to be able to
reach in and successfully attach to the nuts. Can anyone tell me what kind
of spanner/wrench they used to get these nuts?

Many thanks in advance

Marcus Oxer