RE: Difficulty removing wheels

[Mike Larosa <mlarosa@v8q.East.Sun.COM>]

Pick up some silver goo called "Never Seize" at your local auto parts store.

You brush it on with the supplied brush that's attached to the lid.

Use it on on your bolts, around the hub and also on the rear face of the wheel
where it touches the hub. 

Also BTDT, luckily I was in my garage.  After putting it up on jack stands
and the hydraulic floor jack I had to whack it from underneath with a rubber
mallet to get it off.... there was lots of cursing directed to the previous
owner that day :-)

Mike L.
90 V8
91 V8

    _/_/_/  _/    _/  _/     _/      Mike LaRosa
   _/      _/    _/  _/_/   _/       TSE - HAS
  _/_/_/  _/    _/  _/  _/ _/        1 Network Drive
     _/  _/    _/  _/   _/_/         Burlington, MA 01803
_/_/_/   _/_/_/   _/     _/          			 				     		 
E N T E R P R I S E		     Phone:	781/442-1250
  S E R V I C E S		     Fax:       781/442-1418
				     Email:	mlarosa@east.sun.com