Re: No spark 4ktq project

[Huw Powell <audi@mediaone.net>]

Todd Phenneger wrote:
> 
> Yes,
>         It stays on when ignition is in ON position and motor isn't
> running.  And NO the inputs are not jumpered anywhere.  Only change in
> wiring I made to the FP relay area is for the additional wire from the ECu
> for the FP Cutoff at overboost.

yes and no.  the fpr has a wire going to the coil (and tach).  You must
have changed the coil and its control wiring since this is a knock
sensor engine you are installing, right?  So that's the end at which
things might have become muddled.

-- 
Huw Powell (Wondering if I should get Marc to get me a copy of the MC
schematic... got it all visio'd yet dude?)

http://www.humanspeakers.com/audi/

82 Audi Coupe; 84 4kq; 85 Coupe GT; 73 F250