Re: 16v head in an 80

[JShadzi@aol.com]

    The head will bolt on to your block, but sorting out the intake 
tracting/throttle body and fuel lines may be another problem.  Some may feel 
that the whole fuel and ignition system should be swapped over, but your 
CIS-3 should be able to supply the engine properly.  If you put your time 
into researching and getting fittament sorted out you could very well do the 
swap...good luck.
Javad

<< How tough is it to put the 16v head from the Passat into an 80????
 
 What parts do I need?
 
 Considering doing this just for fun....any thoughts?
 
 Also, I'll be installing the shocks in my 89 100 today....wish me luck  :)
 
 Thanks for all the help!!
 
 Robert
 
  >>