Re: H1/H4 Euros

[Huw Powell <audi@mediaone.net>]

> > > Rather that splice new connectors onto the car's
> harness
> > > for H1s & H4s, does anyone know where I can find a
> > > "pigtail" to jumper betwixt the harness and the new
> Euo
> > > bulbs?
> >
> > that would be a poor solution anyway.  You *really
> must* bypass the
> > stock headlight power wires with relays.
> >
> > trigger relays with your 9004 bulb socket signals.
> Attach new
> > connectors to relay output.  Not melt headlight switch.
> Get 13 volts.
> >
> I didn't really mean what I said.  I guess what I'm
> looking for would be plugs with pigtails to jumper from
> the harness to the relays.  The plugs will need the same
> pin configuration as the original rectangular lights
> have.  Haven't looked, but are highbeams and lowbeams the
> same, or different, pin configuration? 

Sorry to jump to conclusions...

sounds like you want a "plug" that will go into the old headlight socket
and get the "data" to the relays.

one way is to use the base of a broken light bulb...

Are your old lights rect sealed beams?  

Then simple 1/4" male spades will work, you only need two (one for high,
one for low), and you only need to work from one outer lamp socket.  The
other three lamp sockets can just be zip tied out of the way (or
removed).

I suspect I still don't understand what you really mean since you make
it sound a lot more complicated than my answer.

-- 
Huw Powell

http://www.humanspeakers.com/audi/

82 Audi Coupe; 84 4kq; 85 Coupe GT; 73 F250

http://people.ne.mediaone.net/audi/thoughts.htm