[V8] Rear Brakes - V8Q - revisited

[cobram@juno.com]

I don't know if it's been mentioned, but the "el cheapo deluxe" tool
works fine too.  http://heh.pl/&1Ta <==just a reference, they're
available at just about every FLAPS out there.

BCNU,
http://www.geocities.com/cobramsri/
You're only supposed to blow the bloody doors off!

 "Coleman, David" <David.Coleman at blackrock.com> writes:
> I did my rears without the tool, but its a bit cumbersome. Basically 
> used a c-clamp and channelocks together -- tighten clamp, turn 
> piston clockwise, tighten, turn, etc. Best to turn the piston a bit 
> to free it up and get it used to rotating. Be careful to not damage 
> the boot seal, and maybe use a rag between the pliers and the piston 
> so it doesn't get all gnarled up. 
> 
> But first tighten the bleeder screw. No need to mess with that...