[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: Distributyor Rotor




Some of the rotors are secured by screws.  Does the new one have a hole for
screws?

David
 ----------
> From: quattro
> To: quattro
> Subject: Distributyor Rotor
> Date: Monday, November 21, 1994 12:47PM
>
> OK, I'm an idiot.  I can't get the distributor
> rotor off my 1991 90Q 20V.
>
> As you may know, this is sort of hard to get at-
> buried under the speed control plumbing.
>
> Once the cap is removed, a rotor should be simple -
> pull firmly, and voila!  But NO, this won;t go.  I've
> pried, pulled, etc.
>
> Any tricks?  And once off, with what shoudl I coat the
> new rotor?  Anti-seize compound?  Teflon spray?
>
> Thanks, folks!
>
> Grant Lenahan
> gfl@cc.bellcore.com
>
>