Re: '89 200TQ ECU questions

[Glen Powell <gpowell@acacianet.com>]

At 04:01 AM 3/14/96 -0500, Robert Myers wrote:
>Alright, I have some questions for the experts.  
>
>While dealing with an unstable idle problem, I noticed that two wires in the
>wiring harness which connects to the ECU have been cut.  In fact, they
>appear to have been more that just cut.  A short section (2 inches or so)
>has been cut out of them so that they are shorter than their neighbors.
>According to an AllData printout, these appear to be ground wires from
>godonlyknowswhere.  Brief reconnection by color code produced no change in
>behavior from the car.

I seem to remember reading somewhere about how the factory grounds different
CPU wires for different models -- possibly to reduce HP and torque for
auto-trans models, etc......

???


"There is nothing inherently wrong with lying in the gutter so long as you
are staring up at the stars and not blowing bubbles in the mud"

Vorsprung durch Technik,

-glen